Sorority Demon
07-14-2009, 03:15 PM
I have a bunch of stuff for a Cobalt that I'd like to sell. Some parts are combatible with the ION Redline and other vehicles.
-ASA JH8 17x7.5 5x110 set of 4, used but perfect, wrapped with Michelin Piot Sport 215/45/17 ~90% tread
http://wibiti.com/images/hpmain/231/262231.jpg
- Ported M62 Supercharger housing, unused. Stage 2 Driveshaft Shop axles, unused
http://wibiti.com/images/hpmain/232/262232.jpg
- Control arm bushings and transaxle mounts
http://wibiti.com/images/hpmain/233/262233.jpg
- Colt cams, idk if these do much for this car, never installed
http://wibiti.com/images/hpmain/234/262234.jpg
- DPIC dual pass intercooler kit, with plate, extra tank, gaskets and y-fitting, all unused
http://wibiti.com/images/hpmain/235/262235.jpg
- GMPP Steering knuckles, NIB
http://wibiti.com/images/hpmain/236/262236.jpg
- GMPP billet crank pulley
http://wibiti.com/images/hpmain/237/262237.jpg
- OEM carbon fiber hood (not pictured). I think its made by Gravana, but there are no markings. It has a very small spider crack. It does not have bolt holes for the stock prop rods.
I've been trying to sell these locally for a while. cragslist failed, ebay is fail... I'll probably accept any reasonable offers, for example, the ported SC housing costs $800 and you get $300 back for sending in your core, but if someone tosses me $300 I'll gladly take it. $300 firm on the hood.
-ASA JH8 17x7.5 5x110 set of 4, used but perfect, wrapped with Michelin Piot Sport 215/45/17 ~90% tread
http://wibiti.com/images/hpmain/231/262231.jpg
- Ported M62 Supercharger housing, unused. Stage 2 Driveshaft Shop axles, unused
http://wibiti.com/images/hpmain/232/262232.jpg
- Control arm bushings and transaxle mounts
http://wibiti.com/images/hpmain/233/262233.jpg
- Colt cams, idk if these do much for this car, never installed
http://wibiti.com/images/hpmain/234/262234.jpg
- DPIC dual pass intercooler kit, with plate, extra tank, gaskets and y-fitting, all unused
http://wibiti.com/images/hpmain/235/262235.jpg
- GMPP Steering knuckles, NIB
http://wibiti.com/images/hpmain/236/262236.jpg
- GMPP billet crank pulley
http://wibiti.com/images/hpmain/237/262237.jpg
- OEM carbon fiber hood (not pictured). I think its made by Gravana, but there are no markings. It has a very small spider crack. It does not have bolt holes for the stock prop rods.
I've been trying to sell these locally for a while. cragslist failed, ebay is fail... I'll probably accept any reasonable offers, for example, the ported SC housing costs $800 and you get $300 back for sending in your core, but if someone tosses me $300 I'll gladly take it. $300 firm on the hood.